Requirements

In order to test this design on hardware, you will need the following:

• Vivado 2024.1

• Vitis 2024.1

• PetaLinux Tools 2024.1

• 1x FPGA Drive FMC Gen4 or M.2 M-key Stack FMC

• At least one M.2 NVMe PCIe Solid State Drive (see supported SSDs)

• One of the supported carrier boards listed below

List of supported boards

FPGA boards

Carrier board	Supported FMC connector(s)
KC705	HPC LPC
KCU105	HPC LPC
VC707	HPC1 HPC2
VC709	HPC
VCU118	FMCP

Zynq-7000 boards

Carrier board	Supported FMC connector(s)
PicoZed 7015	LPC
PicoZed 7030	LPC
ZC706	HPC LPC

Zynq UltraScale+ boards

Carrier board	Supported FMC connector(s)
UltraZed-EV Carrier	HPC
ZCU104	LPC
ZCU106	HPC0 HPC1
ZCU111	FMCP
ZCU208	FMCP
ZCU216	FMCP

Versal boards

Carrier board	Supported FMC connector(s)
VCK190	FMCP1 FMCP2
VHK158	FMCP
VMK180	FMCP1 FMCP2
VEK280	FMCP
VPK120	FMCP
VPK180	FMCP

For list of the target designs showing the number of M.2 slots and PCIe lanes supported, refer to the build instructions.